SELECT MY STORE
16 STEPS
Need to protect your vehicle, outdoor tools, and equipment from the elements with a portable shelter? Don’t worry – you’ve got this.
WHAT YOU'LL NEED
Step
Select shelter size and strength
Step
Lay frame parts on a flat surface
Step
Follow the set up instructions
Step
Assemble frame from roof structure
Step
Build the end rib first, then the intermediate end rib
Step
Attach intermediate rib to the end rib
Step
Hand tighten fasteners
Step
Attach all remaining ribs
Step
Assemble the final end rib
Step
Square the frame according to the manual using a measuring tape
Step
Rotate the anchors
Rotate the anchors into the ground until the eye-lid is about 1 to 2 inches from the ground. Use one anchor per leg to secure your shelter.
Step
Use a ratchet to tighten all fasteners
Step
Roll-up the entrance door and secure with bungee balls
Step
Center the cover
Pull the cover over the frame making sure it is centered. Check that there is an equal amount of overhang on all corners.
Step
Slide the counter weights in at the bottom of the cover and affix them together
Step
Tighten each corner
When the cover is installed properly you should not be able to put your fingers between the fabric and the ribs. The cover should lay evenly without wrinkles.